When is panic hardware required on doors

The maximum unlatching force shall not exceed 15 pounds. Panic hardware used on balanced doors must be touchpad type, and the touchpad must not extend more than half the width of the door measured from the latch side. Doors serving electrical rooms with equipment rated 1, amperes or more and over 6 feet wide that contain overcurrent devices, switching devices, or control devices with exit access doors.

Von duprin panic hardware. Upper latch activates doors then they lose power. Can flush bolts be used on double egress doors? Flood Door System. Which electric lock can be used with an exit device? Single door with panic bar. Engage sectors are full. Panic HArdware for pool gates. LX on panic device function. What is Steelcraft shipping limitations. Panic device size door width. What is difference between panic and exit device.

Change lever on fire exit device. What Von Duprin panic hardware is recommended that works well with Magnetic locks at double doors. I am looking for an Allegion hardware consultant in Palo Alto area. Florida building code and steelcraft ro falcon doors.

When are fire pins needed on doors. Falcon Panic Parts Catalog. Do steelcraft fire rated doors have intigrated fire rated hardware. Are storeroom function locks allowed on fire exit doors. Door locking hardware Dutch door.

Rim Fire Exit Hardware. Panic hardware at exterior door? Beginning with the edition, doors that latch or lock, within 25 feet of the required work area, serving the following rooms, require listed panic hardware or fire exit hardware: 1.

Where equipment is amps or more and contains overcurrent devices, switching devices, or control devices 2. Where equipment is volts or more 3. Battery rooms Residential, business and mercantile occupancies such as apartments, office buildings or retail facilities typically would not require panic hardware on any doors unless there is an assembly, educational, or high hazard area within the building with an occupant load of 50 or more per the IBC or or more per NFPA If these buildings contain electrical rooms that meet the criteria above, panic hardware would be required on those rooms.

Current codes require panic hardware to be mounted between 34 inches and 48 inches above the floor. Existing panic hardware may have been installed at other mounting locations in accordance with previous code requirements. However, some codes have recently been modified to require door hardware to operate with 5 pounds of force, and the more stringent limitation may apply to panic hardware in jurisdictions where these codes have been adopted. No additional locking device deadlock, chain, padlock and hasp, etc.

The exception to this is a delayed egress or controlled egress device allowed by code in certain applications. An electric latch retraction device may be used to provide dogging for fire exit hardware, as long as the latch projects automatically upon actuation of the smoke detection system.

Crossbar style devices may not be used on balanced doors. The reason for this is that if the actuating portion extended all the way over to the hinge edge of the door, a building occupant could push on the wrong end of the panic device and the door would not open. This emergency hardware system is perfect for aluminum doors and features special rods to accommodate the hollow body of the door frame. Because the hardware is concealed internally, there is fewer chances of unwanted intruders using your panic doors as entryways.

This type of crash bar looks similar. The difference lies in the locking mechanism which is a heavy duty side latch that locks into the strike plate within the door frame. It is not equipped with vertical locking rods. Once emergency exits are in place, you must adequately mark them as such and post notifications of their presence and location throughout the building. This can be a challenging task, as fire laws and building codes are very specific.

Great Valley Lockshop supplies, installs and services an extensive range of commercial doors and hardware and exit devices.

Find out more about our advanced commercial security solutions and services at or request a free quote online. Chris is a volunteer firefighter and "Life Member" for East Whiteland Township Volunteer Fire Company and a huge Nascar fan who loves to go camping and enjoys the outdoors.

Chris Strauss frequently blogs for Read other articles written by Chris Strauss. Discover what thousands of our customers already know: When you hire Great Valley Lockshop you can expect us to be prompt, passionate and genuinely enthusiastic about your project!

We are serious about privacy. We will never share your information with third parties. Please read our Privacy Policy for more information. Call Us. Find Us. Free Estimate. May 21, Last Name. Your Phone Number. Describe Your Project.